Power factor-Basics

 In AC circuits, the power factor is the ratio of the Real/true power that is used to do work and the apparent power that is supplied to the circuit.

  • The power factor can get values in the range from 0 to 1.
  • When all the power is reactive power with no real power (usually inductive load) - the power factor is 0.
  • When all the power is real power with no reactive power (resistive load) - the power factor is 1.
Power factor=True power/Apparent power
=watts/volts-amps
=KW/KVA
Real power is the actual power consumed or dissipated due to the resistance load and is 
  • Measured in Watts
  • Symbolized by the capital letter P, as always

Apparent power is a phantom power combination of reactive power and true power and it is the product of a circuit’s voltage and current, without reference to phase angle,

  • Measured in the unit of Volt-Amps (VA) 
  • Symbolized by the capital letter

Why should I improve the power factor

Improving the power factor can improve the current-carrying capacities

  • Improve voltage drop in equipment or even cancel completely the (inductive) reactive current in upstream conductors
  • Reduce power loss/heat generated
Losses in cables are proportional to the current squared. The reduction of the total current in a conductor by 10% for example, will reduce the losses by almost 20%.
  • Reduction in cable size
  • Lower electric bill and save money

2 comments:

  1. Thank you for sharing this wonderful Blog. Unotech Engineering offers a complete bouquet of components for on-road & off-road applications. Engine components, Suspension parts &marine parts, Locomotive & Defense components.

    ReplyDelete
  2. Thanks for sharing this blog. Unotech Engineering offers a complete bouquet of components for on-road & off-road applications. Engine components, Suspension parts & Power train, Locomotive & Defense components.
    marine parts

    ReplyDelete

Followers